Configurations and Environment

Can I run Elysium License Server in a cloud environment?

This configuration is out of the scope of the technical support.

Can I use the Elysium License Server in a virtual environment?

Yes, you can, as long as the MAC address does not change.

If the MAC address of the License Server computer changes for any reason, the Elysium vendor daemon will stop running, and the license will no longer be available for use.

Can I run Elysium License Server in an IPv6 environment?

If you use IPv4 over IPv6, you can operate with a standard license.

If you use an IPv6-only network environment, an IPv6-specific license is required. Please contact your sales agent.

Can I register a license issued by a vendor other than Elysium to the Elysium License Server? Can I register a license issued by Elysium to a FlexNet Publisher License Server provided by another company?

Neither case is supported, and doing so may cause the license server to stop functioning correctly.

Only licenses issued by Elysium should be registered to the Elysium License Server, and do not register licenses issued by Elysium to any license server other than the Elysium License Server.

Can I install the Elysium License Server on a computer to which the FlexNet Publisher License Server is installed?

Yes, you can, as long as the port numbers used by FlexNet Publisher and the Elysium License Server do not conflict. If the port numbers conflict, the license server may not function correctly.

Operations

Which port numbers must be open to operate Elysium License Server?

Please open the following three TCP ports:

1) The port for communication with the License Server Management Interface

　This is set during the installation. (Default value: 8090)

2) The port for communication between the Elysium products and the license server

　This is set during the installation. (Default value: 27000)

3) The port used to access the vendor daemon

　This is assigned automatically. You can check it on the License Server Management Interface: [Administration] tab > [Vendor Daemon Configuration] page.

　To use a fixed port number, please refer to: "Can I fix the port number used to access the Elysium vendor daemon?" section in this page.

How do I change the port number for the License Server Management Interface after installation?

Follow the steps below to change the port number.

1. Access the License Server Management Interface via a web browser.

2. Log in as an administrator from the [Administration] tab.

3. Select [Server Configuration] page.

4. In the "Web Server Configuration" section, enter the new port number in the "HTTP Port" field.

5. Click [Save].

6. Restart the "Elysium License Server" service.

How do I change the port number used by Elysium products to communicate with the license server?

Follow the steps below to change the port number.

1. Access the License Server Management Interface via a web browser.

2. Log in as an administrator from the [Administration] tab.

3. Select [Server Configuration] page.

4. In the "License Server Configuration" section, under "License Server Manager Port", enable "Use this Port" option, and enter the new port number in the field.

5. Click [Save].

6. Restart the "Elysium License Server" service.

Can I fix the port number used to access the Elysium vendor daemon?

Yes, follow the steps below to fix the port number.

1. Access the License Server Management Interface via a web browser.

2. Log in as an administrator from the [Administration] tab.

3. Select [Vendor Daemon Configuration] page.

4. Select "elysium" from the vendor daemon list.

5. Under "Vendor Daemon Actions", click [Stop].

6. Specify the port number in "Vendor Daemon Port" field.

7. Click [Save].

8. Under "Vendor Daemon Actions", click [Start].

How do I restart the "Elysium License Server" service?

Follow the steps below to restart the "Elysium License Server" service.

1. Select [Computer Management] from the Windows menu.

2. In the "Computer Management" window, select [Services and Applications] > [Services].

3. In the list, right-click "Elysium License Server", and select [Restart] from the context menu.

How do I completely uninstall the Elysium License Server?

Follow the steps below to uninstall the Elysium License Server completely.

1. Select [Settings] > [Apps] from the Windows menu, and uninstall the Elysium License Server.

　If you try to uninstall the Elysium License Server while it is still running, a confirmation dialog appears. Click [Yes] to continue with the uninstallation.

2. Delete the contents of the Data folder specified during installation.

　Example: C:\ProgramData\Elysium\License Server

Can I check the license borrow period in the License Server Management Interface?

No, you cannot check it in the License Server Management Interface.

To check the borrowed license information, on the client computer where the license is borrowed, run "lmtools.exe", and click [List Currently Borrowed Features] in the "LMTOOLS by Flexera" window.

Migration

Can I use Elysium products in former versions (the versions used with Sentinel RMS License Manager) with Elysium License Server?

No.

Can I keep using Sentinel RMS License Manager after migrating to Elysium License Server?

No. After you complete the migration, uninstall Sentinel RMS License Manager.